HAUSER™ H55

Hauser 55: Technology to measure

Hauser 55: An expandable jig grinding machine, from simple bore and form grinding machine to fully automatic high-tech grinding cell

	Hauser H45
Work range
Range of adjustment X, Y	700 x 500 mm
Vertical adjustment of grinding head (W)	500 mm
Clearance between table surface and U-axis carrier plate for grinding motor	785 mm
Distance between upright columns	750 mm

Diameter ground in planetary mode, with grinding wheel Ø 50 mm/70S:
grinding motor 70S in U-axis center position, automatic grinding mode	144 mm (max.)
grinding motor 70S with extension plates, semi-automatic mode	360 mm (max.)
Diameter ground in planetary mode, with grinding wheel Ø 100 mm/40S:
grinding motor 40S in U-axis center position, automatic grinding mode	194 mm (max.)
grinding motor 40S with extension plates, semi-automatic mode	360 mm (max.)
Taper grinding, included angle (divergent and convergent)	120 degree max.
Table
Working surface	770 x 630 mm
6/7 T-slots, width	14 mm
Permissible table load	500 kg max.
Feeds
Table and saddle X, Y, W
Machining speed	0-2'000 mm/min
Traversing speed	4'000 mm/min
Grinding spindle Z, C, U
Diameter of the spindle sleeve	125 mm
Basic machine is prepared for use of the following grinding spindle speeds:
for electric grinding motor 40S, infinitely adjustable & programmable	4'000-40'000 min-1
for electric grinding motor 22S, infinitely adjustable & programmable	4'500-22'500 min-1
for electric grinding motor 45S, infinitely adjustable & programmable	9'000-45'000 min-1
for electric grinding motor 70S, infinitely adjustable & programmable	9'000-70'000 min-1
System to allow use of grinding turbine T13	up to 130'000 min-1
C-axis planetary mode:
Planetary mode, infinitely adjustable and programmable	5-350 min-1
C-axis follow-up mode, AC servo drive	up to 10 min-1
Z-axis in alternating stroke mode:
Z-alternating stroke movement, infinitely adjustable	Vmin. 0,500 mm/min
Z-alternating stroke movement, infinitely adjustable	Vmax. 22’000 mm/min
Z-stroke frequency	8 Hz max.
Z-stroke length, infinitely adjustable	0.1 up to 170 mm
U-axis radial travel capacity (in CNC-mode)	von –3 up to +47 mm

The Hauser™ H55 Series is an expandable jig grinding machine, from simple bore and form grinding machine to fully automatic high-tech grinding and hard milling cell. Now with a new Hauser jig grinding/hard milling head which provides an unparalleled variety of grinding and milling strategies with its Z, C and U configuration. With its high grade rigidity and stiffness plus a significantly boosted stroke speed & frequency this has lead to the doubling of stock removal capacity, reducing grinding cycle time, whilst cutting in half spark out time. Hydrostatic guided spindle bearing system allows circular accuracies better than 0,5 µm in planetary grinding and an unparalleled U axis capacity up to +47 mm increases the grinding autonomy. Automated taper grinding is available with Z U axis interpolation. Thanks to this most modern grinding head technology, the combination of high accurate jig grinding with complementary hard milling has become a Hauser focal point. Usable surface on the H45 is 770 x 630 mm, permissible load 500 kg and on the H55 the usable surface is 1440 x 860 mm, permissable load 800kg/optional 1500 kg.

Featuring a robust, distortion-resistant module and consequent lay-out with regard to thermal stability

GUIDEWAYS / MEASURING SYSTEMS / AXES DRIVES

Sliding guideways wherever required
Linear guideways wherever possible
Absolutely smooth stroke reversal •Measuring systems optimally positioned with regard to the measuring technique • Axes drives in the centre of friction

GUIDEWAYS

Scraped sliding guideways in X and Y axis •Oil pressurized guideway- lubricating system, to avoid stick-slip effect ATC automatic tool changer ATC automatic tool changer with 12 magazine positions, permitting automatic machining with grinding wheels from Ø 3 mm to Ø 50 mm (alternatively with grinding wheels from Ø 0,3 mm to Ø 5 mm)

ATC AUTOMATIC TOOL CHANGER

ATC automatic tool changer with 12 magazine positions, permitting automatic machining with grinding wheels from Ø 3 mm to Ø 50 mm (alternatively with grinding wheels from Ø 0,3 mm to Ø 5 mm).

GRINDING MOTOR

Grinding motor 70S ATC with its extremely wide range of application, from 9000 min-1 to 70000 min-1. This grinding motor, and its state-of-the-art design, is an absolute must for getting optimal use
out of the grinding tool changer.

CONTROL SYSTEM

As standard, the X,Y, C, U, Z and W axes are CNC controlled. Based
on the FANUC 30i control with integrated PC, we have created HAUSER SOFTWARE CYCLES, ensuring that the control will perfectly cover all the special requirements of jig grinding.