|
AC-1 / AC-2 |
Max. Turning diameter |
150 mm |
Max. Chuck diameter |
215 mm |
Max. Feed force X / Z |
8 / 10 kN |
Working stroke X- / Z-axis |
830 / 180 mm |
Max. Process speed X / Z |
60 / 30 m/min |
Number of tools |
12 |
Max. Speed |
45.000 rpm |
Spindle bearing diameter |
80 mm |
Dimensioni |
AC-1: 2.450 x 2.400 x 3.000 mm AC-2: 4.300 x 2.550 x 3.000 mm |
Peso |
AC-1: 7.000 kg AC-2: 15.000 kg |
- Left and right machine variants available
- Machine columns with very good stiffness behavior and optimized damping properties due to remaining sand in the model
- Linear guides designed with high accuracy and preload classes in all machine axes
- All linear guides and feed drives arranged outside the working area for protection against chips
- Direct path measuring systems in all machining axes (glass scales)
- High dynamics of all machine axes
- Optimal chip fall downwards
- Self-built turning spindles with very good concentricity and axial run-out accuracy values
- Easy installation and removal of the turning spindle in the event of repairs
- Compact footprint due to integrated handling unit (2-axis version with swivel unit)
- Main spindle A6 according to DIN 55026
- Interface in tool turret VDI or Capto possible
- Integrated measuring probe
- Driven tools (for drilling operations)
- 4-axis machining (through additional turret on cross slide unit)
- Additional internal grinding unit
- Additional external grinding unit
- Combination of turning and grinding in smallest space
- Additional drilling head
- Additional Y-A axis unit with milling spindle for gear milling
- Spatial separation of both machine halves (to a certain extent independent of each other)
- AC-2: Simultaneous or progressive machining (with possibility of turning the workpieces)
- AC-2: Various automation variants
4-axes machining
Highly productive simultaneous machining in one machine with two powerful disk turrets (4 axes). Intelligent technology processes and the combination of different machining steps offer high savings potential. Working with two tools simultaneously shortens the machining times of the workpiece and reduces the cost per part.
Rotational turning
With the rotation turning process developed and patented by WEISSER, precisely machined surfaces can be generated with twist-free finishing precision and thus replace the expensive grinding operations. The simultaneous rotation of workpiece and tool cutting edge reduces the machining time by up to 77 % compared with hard turning.
Hard turning
Hard turning describes the turning of steel with a hardness of more than 45 HRC. It is an efficient alternative for grinding hardened workpieces. The advantages of this process are shorter cycle, set-up and tooling times as well as the relatively lower investment costs and the options of wet and dry machining.
Out-of-round turning
3 times capacity with WEISSER HOT system for shorter piece times and lower piece costs. The technology enables the highly productive machining of a wide range of workpieces, such as pistons for combustion engines, camshafts, polygonal profiles or the production of polygon shapes (shaft-hub connections) with process-oriented perfection.
Internal / external grinding
Machining with the technology of external and internal cylindrical grinding in one machine is exemplary for perfect hard fine machining of rotationally symmetrical workpieces. In order to achieve optimum cycle times, this machining technology can be combined with hard turning or rotational turning processes.
Gear cutting (hobbing)
Integration of a hobbing module, being the only method to manufacture internal and external gearings with different helix angles and directions in a single machining center. This manufacturing process combines hobbing and slotting by continuous hobbing with maximum feed rate.